Progress Profiles offers innovative and performing drainage, uncoupling and patented waterproofing systems that allow to protect with maximum effectiveness and safety all types of terraces and balconies, even without demolishing the external floor.

PRODESO® DRAIN 8 is a draining, uncoupling and waterproofing patented membrane, with a total thickness of 8 mm, which can be installed even on not perfectly cured supports. The “air chamber” below the floor drains the water that has penetrated below it, it facilitates a fast drying of the adhesive and drastically reduces the rise of triacetates and the appearance of efflorescence. The system, ideal for a correct laying on terraces and balconies even of large slabs, is completed with a band in polyethylene and elastic polypropylene and with a bicomponent waterproof adhesive. Quick and easy to install, the PRODESO® DRAIN 8 is very versatile and guarantees long life for outdoor flooring.

PRODESO® DRAIN 4 is a uncoupling membrane which creates an “air chamber” below the floor favoring the the drainage of the water and the micro-ventilation. This “air chamber” guarantees a fast and smooth drying of the adhesive, even in case of large size tiles, and reduces significantly efflorescence formation and triacetate rising in joints. The uncoupling and vapour management properties of PRODESO® DRAIN 4 guarantees the laying even in not perfectly cured supports. Easy and quick to install, PRODESO® DRAIN 4 has an overall thickness of only 4 mm.

The electric underfloor and wall heating system PRODESO® HEAT GRIP 5 SYSTEM, designed, manufactured and patented by Progress Profiles, is an innovative system that allows to obtain in a short time and at low cost a pleasantly warm and extremely comfortable environment. The system is applied using normal cementitious adhesives and thanks to its uncoupling and waterproofing properties can be installed on cracked substrates and also during shrinkage. Thanks to the latest generation Wi-Fi thermostat, the system can be programmed daily even remotely and this allows you to optimize comfort and reduce consumption. Also available in the self-adhesive version PRODESO® HEAT GRIP 5 STICK.

PRODESO® ECO is an uncoupling membrane, which allows vapour management and heat distribution with only 4 mm thickness. It is composed of a polyethylene sheet, with square base truncated pyramid cavities, to which a polypropylene non-woven fabric is thermowelded and ensures the membrane is bonded to the support. The uncoupling and vapour management features of PRODESO® ECO allow it to be laid even on not perfectly cured supports. Also available in self-adhesive version PRODESO® ECO STICK.

PRODESO® SOUND STICK is an uncoupling and soundproofing membrane, with a thickness of 2.5 mm, composed of a high density polyethylene sheet to which two polypropylene nonwoven fabrics are heat-sealed. Due to its uncoupling properties, it is not necessary to respect any joint in the screed before the laying of tiles and natural stones. PRODESO® SOUND STICK guarantees an acoustic wave reduction from foot traffic up to 17dB.

Renovate rooms without demolition

Coverskirting ROUND & SQUARE is the ideal solution for those who want to renew without the hassle and costs of demolition. Facilitates the passage of cables, keeping the environment tidy. With simple and quick installation, it allows for efficient and cost-effective restyling.

New finishes available for all shower profiles of the Proshower Profiles series. For a modern bathroom that is made to perfection.

Waterproof tape/corner provided in the last 2 cm of butyl adhesive for the connection between shower tray/ tub and
wall. The butyl-free strip portion can be glued with normal cement adhesive.             

New finishes for PROSHOWER TOP PRO shower grids, in exclusive combination with the PROSHOWER BASE L PRO system.

Stainless steel and aluminium shelves for wall installation even after tile installation.
Thanks to special fixing flanges can be installed both during the installation of the ceramic tiles and at a later stage
by inserting the flanges in the joint between the tiles. Available in 112x300 format in the Design and Line versions.
The shelves are suitable for installation in bathrooms and kitchens.

PROSUPPORT PROFILE is a profile for the protection and finishing of the external edge of raised floors in ceramic, wood and composite materials. The vertical section of the profiles features a specially designed fins that create a dovetail cladding system. This dovetail cladding system allows for the adhesive used to fix the covering to also mechanically bond to the profiles. The profile is also available with a decorative edge of 2 cm height (PROSUPPORT PROFILE T).

PROSUPPORT SIDEWALK, is a perimeter profile for the protection and finishing of the outer edge of raised floor with ceramic tiles, wood and composite floors. It is equipped with a horizontal flat base to be placed above the flat head of the PROSUPPORT TUBE system and with a vertical visible part of a total height of 60-80-100 mm. 

Special self-extinguishing and fire-resistant thermoplastic material within 10 seconds of contact with the free flame.

Complete kit made of polyproline with V0 self-extinguishing degree, ideal for installation in environments where maximum fire resistance is required. 

Recycled rubber plate, 20 x 20 cm 3 mm thick, to protect the bituminous sheath for laying Prosupport.

New 0.5 mm thickness for the PROLEVELING WEDGE SYSTEM tile levelling system.